Road Studs with Visible, Durable and High Performance

Road Studs with  Visible, Durable and High Performance

road studs

      Road stud are a common means of traffic barriers used to guide people in the right direction to prevent speeding and traffic accidents, used to guide people in the right direction to prevent speeding and traffic accidents. Mainly used in high ways, tunnels, railways. Manufactured from a high impact resistant polycarbonate resin, the inner-ribbed contour of the stud is shaped to dissipate tyre impact,increase strength and reduce damage. The polycarbonate reflective lens is coated with a superior protective material that com bines ceramic and polymeric elements, adding more resistance to abrasion and cracking. The result is a road stud that de monstrates high-impact strength and holds up longer on today's heavily trafficked road network.

LED Pedestrian Zebra Line Road Studs

We manufacturing durable road studs with the features of strong pressue resistance, environmentally friendly materials, high and low temperature resistance, anti-corrosion.

Unlike our competitors, our product utlizes an innovative clip-on modular components system to minimize repair and replacement costs.

The primary color all-aluminum material can pass 20 tons of inner car, resistant to water, oil, chemical and other substances, can not afford embroidery.

NOBLE road studs have been fully tested on all conditions and proved itself on the roads to be both ecomical and top quality as a market leader.

road studs

Advantages of waterproof stud light

  1. The round design have little resistance on impact which makes the stud light robust.
  2. Two reinforced veins are designed inside to strengthen compression resistance.
  3. Electronics and optics are fitted inside which makes the unit waterproof.
  4. According to requirement the number of LED can be single light, three lights on one side.
  5. Two screw holes are designed on both sides to be fitted steadily with screws in road or round post.
  6. Epoxy glue is filled in the shell. It is easy, simple and steady to install like a stnadard road stud with two screws.  

 Specification of visible road stud

Product material caast aluminum shell Product size 100*108*20MM
Product weight 300g Working mode always on or flash
LED light source Taiwan crystal lamp beads Working voltage

DC24V

Visible distance 500M Waterproof rating

IP68

Lamp color red yellow green Operating temperature -20C to +50C
Load capacity 20T Working power <2.5W
Leds per unit 3 Fixing method

stainless steel screw and nylon tube

Activation integration with H.A.W.K. controller Controller Microprocessor(sell separatedly)

Controller Specification

Produc mode NBTPC-20
Product material ABS
Peoduct size 200*120*75 MM
Product net weight 800g
Working voltage 12-24VDC, 110-220VAC
Working power <2W
Working power <2W

Road studs are a common means of traffic barriers used to guide people in the right direction to prevent speeding and traffic accidents. Maninly used in high ways, tunnels, railways. Manufactured from a high impact resistant polycarbonate resin, the inner-ribbed contour of the stud is shaped to dissipate type impact, increase strength and reduce damage. The polycarbonate reflective lens is coated with a superior protective material that combines ceramic and polymeric elements, adding more resistance to abrasion and cracking. The result is the road studs demonstrate high-impact strength abd hold up longer on today's heavilytrafficked road network.

road studsroad studsroad studs

 

Share this Post:

Send us an Email

Work Time :
08:00-18:00(Beijing time)
Fax :
+86(755)27651483
Telephone :
+8613927455427(Working time)
Email :
trafficloopdetector@gmail.com
Factory Address :
Mingjinhai Industry Park, Tangtou Road,Shiyan Town, Bao'an District
contact us