Video Camera Detector With Wireless Camera Detector For Intersection
Video Camera Detector
Through the unremitting efforts of my engineers for three years. our engineer developed a video camera detector. and it named TCD-8. it will some accessories. it including lens, LED, Camera brackets and hoop, waterproof outlet. combination of all parts then it was complete video camera detector. the traffic detection system can divide into wired and wireless camera detector.
with the wired camera detector. 1 standard intersection. we can offer below solution to customer: (4pcs antenna + 1pcs Output board+ 1pcs controller+ 4pcs video camera detector).
with a wireless camera detector, we can offer a solution as below: if the wireless video camera detector used in city power.(5pcs antenna + 1pcs Output board+ 1pcs controller+ 4pcs video camera detector). if the wireless video camera detector used with solar (4pcs antenna + 1pcs Output board+ 1pcs controller+ 4 pcs video camera detector)
NVR( Network video camera). video camera detector through the detector area whether having a car exist and transfer this information to the controller and indicate the green time. Usually. NVR working with video camera detector. you can order NVR from our company and you can also order NVR in your local.
How to install a video camera detector:
Setp1. Use four M6 stainless steel internal hexagonal screw and nuts to lock the mounting bracket and hoop bracket together. 2. used the stainless hoop to fix the video camera detector on the light pole, 3. adjust the angle of the camera and the mounting brackets and fix it with the hexagon socket screw.
Step 2. Make sure the video camera detector lane area within the camera's shooting area.
Step3. Make network cable from the camera to IO board.
Step4: Turn off the IO board, then the connect the camera cable to the camera Ethernet port.
Step5: Connect the output signal from the IO board to the traffic signal controller. connect the PC/NVR to IO board(Note: insert the fuse, the camera Ethernet port will POE output)
Step6: Turn on the IO Board power supply. The IO board Error LED will turn on, after the camera works normally, the Link LED will turn on and Error LED will turn off.)
Step7: After the video, the camera detector works normally, the camera LED will flashing.
Step8: After installing our camera setting software, please send us a machine code. then we can send you the serial code.
Step9: Open the camera setting software, click search to check the camera which had connected success. 01 is camera1, 02 is camera 2.....
Step10: Adjust the camera's shooting area to the best effect, then you can draw the loop in the lane. Note: the loop direction is the driving direction, also make sure that the ID of the video camera detector in an IO board is unique. if have the same ID camera, the output will become uncontrollable.
Step11. After the drawing is complete, save it to the camera......
Step12. when the camera working normally. if a vehicle is detected, we can check the output signal through the software taskbar or the IO board signal group LED will turn on.