vehicle motion sensor wireless vehicle rader for sale
vehicle motion sensor
vehicle motion sensor utilizes K-band microwave technology to detect people and vehicles from an overhead position. It provides wide coverage and high resolution to activate all types of automatic doors and industrial gates and traffic barriers. The RD24-6M is easily installed at a height up to 20 feet ( 6 meters). With its versatile mechanical orientation, the RD24-6M ensures accurate positioning to the required coverage area. The detection sensitivity and direction of movement( approaching, leaving, or both) are programmed by reset switch settings.
Radar vehicle sensor application in parking barriers, Automatic Doors, and Industrial Gates. For the techical parameters. Please check the below:
Operating Frequency |
24.150GHz
|
Input voltage |
10-24VDC
|
Working current |
< 150mA
|
Output Power(EIRP) |
< 20dBm
|
Relay Contact |
1A @ 24 VDC/AC
|
Relay Control time |
1-6s adjustable
|
Detectable Speed |
20-90ms
|
Sensitivity |
3 levels
|
Horizontal Directionality |
0-28° |
Vertical Directionality |
0-60° |
Detection Range: |
1-6m(3.3-19.7ft) |
Operating Temperature |
1-6m(3.3-19.7ft) |
Mechanical Protection |
IP67 |
Detection Indicator |
Green LED |
Power LED |
Red LED
|
Housing |
ABS
|
Dimensions |
L 0.39ft(118mm) x W 0.32ft(98mm) x |
Weight |
1.0lbs(30g) |
Connection |
4.9ft(1.5m) cable
|
vehicle motion sensor important tips:
- Please use a 9-24VDC 1A or above power adapter for independent power supply.
- When using a gate for power supply, please ensure that the output current is not less than 200ma.
- When applied to lanes, the best height between the radar center and the ground is 50-60cm
- The distance between the center of the radar and the fence pole, the octagonal fence is not less than 25cm, and the right-angle fence is not less than 30cm.
- The radar installation surface should be adjective to the ground and be fixed reliably.
- The ground within the detection range should be flat without any obstacles. When the angle between the passing vehicle and the radar is greater than 30 degrees, please set up road barriers to guide the vehicle through.
- The vehicle radar with 6 menus can be chosen.
The meaning of the indicator light and function menu (red light)
Menu |
Setting function |
Default |
1 |
Detection distance: The reading corresponds to a distance of 1-6 meters |
3 meter |
2 |
Sensitivity: Reading value 1: Low 2: Middle 3: High It is used to set the factory default value when the reading is 6 |
2 |
3 |
Gate closing speed: reading 1-6 corresponds to time 2-12 seconds |
6 second |
4 |
NO distinction between people and vehicles: reading 1 distinguish between people and vehicles: Reading 2 |
2 |
5 |
vehicle motion sensor Relay output delay: 0-6 seconds when the reading corresponds to the delay |
0 seconds |
6 |
Scene setting: Reading is 1 straight lane mode 2 is the fence lane mode 3 is trigger mode |
1 |