The Parking Lot Of Traffic Lights And Loop Detector Use Of Sale
The parking lot of traffic lights
The parking lot of traffic lights has a great effect. It reduces the role of the ram and the crash to the driver's friends. When the red light is on, the parking is waiting. When the green light is released, especially when the one-way street is used, the effect is very obvious. Trouble and accident.Feature of product:Reduce overall operating & maintenance costs: Energy saving:90% reduction in power consumption vs incandescent; Reliability & traffic safety:·Improved visibility over the life of the product Reduces emergency lamps outs Design minimizes sun phantom effects; Easy to install into an existing signal enclosure. The parking lot of 100mm traffic light parameters:Shape:100mm (4”)Cobweb cover High brightness LEDs with integrated optics; Moisture and dust tight seal; Total Harmonic Distortion<20%(with PFC); Operating Temperature Range(optional):-20℃ to 60℃Angle: Avg. ≥30° Down ≥30°; Operating Voltage Range:220V; Insulation Resistance:≥2M; Life:100,000H; Housing material: PC(PMMA);
Color | size(mm) |
Model Number |
Profile |
Voltage |
LEDs |
Typical Wattage at 25℃ |
Luminance (cd/㎡) |
Typical Dominant Wavelength (nm) |
red |
100 |
JD100R-1 |
Round |
12-24V | 45 |
<3 |
>4000 |
625 |
Green | 100 |
JD100G-1 |
Round |
12-24V | 45 |
<3 |
>4000 |
500 |
100mm red-green traffic light size:
The parking lot of traffic lights installation:
Install the shield:
1,Confirming the installing direction of the traffic signal light.
2,Fixing the aluminum shield to the traffic signal panel with
four nails of M4*6 standards
Hole position:
Drilling three holes with Ø15 millimeter diameter,refer to
the left installation diagram
Height: the traffic core will be fixed to the pole with 2.5M
height (the distance between the ground and the lowest end
of pole)
The frontispiece of the traffic light must face to the middle of
vehicle channels
Notice: the traffic direction also can be changed by adjusting
the pole.
Installation step:
Inserting the tip to the two holes and locked up by club gasket
Inserting the cable
Fixing the two traffic brackets to the M10 screws
Screwing down the nut
Signal direction adjusting:
Release the connecting nail between the screws and traffic light
Adjusting the direction of the signal light
Tighten the screws, checking the traffic light direction is right or not.
100mm red-green traffic light can work with the vehicle loop detector for the parking system.
The parking lot of mini traffic lights:
The parking lot of traffic lights usually has 100mm red + green two lights round, red cross green arrow two light, 200mm red + green two lights, red cross green arrow two light, 300mm red + green two lights, red cross green arrow two light,our company has been specialized in research and development and production of various signal lights and loop detector since its establishment The products with high quality and competitive price have already benefited thousands of customers.