Loop Sensor For Vehicle Access China Factory For Parking Access Control System

Loop Sensor For Vehicle Access China Factory For Parking Access Control System
Loop Sensor For Vehicle Access China Factory For Parking Access Control System

Product Details:

  • Serial Number: LD-105
  • Country of Origin:Guangdong,China
  • Certificate:CE

Payment & Shipping Terms:

  • Price Quote:USD39.16
  • Minimum Order: 10 Piece
  • Average Delivery Time:After receiving payment 3-5 working day
  • Payment Method:T/T ,Western Union, Cash
  • Package Details:50 sets/CTN (Carton size: 455*285*275 mm)
  • Ability to Supply:5000 per/month
Contact Us

Loop Detector Wiring Diagram:

Loop Detector Wiring Diagram. The Loop Sensor For Vehicle  Access. Usually, the detection loop should be the rectangle. The two long sides are perpendicular to the direction of the movement of the metal object. The gap between them is recommended to be 0.8-1 meter. The length of the long side depends on the width of the road. Generally, both ends are narrow than the separation distance of the road for 0.3-1 meter. In order to make the detector work in the best condition, the inductance of the loop coil should be kept between 100uH-300uH, In the case of loop coil inductance unchanged. The cylinder numbers have an important relationship with the perimeter, the perimeter is smaller, cylinder more and more.:

Loop Sensor for Vehicle Access

Loop Sensor for Vehicle Access Features

1. Easy to use and install
2. Good quality (reduced after-sales costs and troubles)
3. Obey the rules of use of parking systems, intersections and toll stations
4. Cost-effective.
5. Professional services
6.OEM/ODM Service
7. Accept small orders

Loop Sensor for vehicle access Specification:
Self-turning range: 20-2000uh
Voltage: 12-24VDC 
Relay output: presence relay/fault relay
Working temperature: -40℃ - +70℃
Frequency: 4 steps switch, 20-80KHz 
Response time: turn on 10-90MS, turn off 10-90NS
Reset: reset by the push button on the front of the enclosure
Humidity: up to 95% relative humidity without consideration
Sensitivity: 16 ways selectable, highest: 0.010% DL/L, Lowest: 2.56% DL/L
Loop wire: more than 10 meters requires the use of a 2 core shielded cable, do not exceed 30 meters distance between control box and loop Size: 75mm*43mm*110mmabout vehicle loop detector cable :

Regular national standard Teflon cable, high-temperature wire, high-temperature resistance, a variety of colors. (Some manufacturers use ordinary tin-plated wire to pretend to sell high-temperature wire, which is a low-cost wire, but there is a big safety hazard in long-term use.) In China, there are many fakes, shoddy, so don’t use low prices. Purchasing goals, the key is good quality and fair price is the first choice.

Loop Sensor For Vehicle  Access.

loop detector wiring diagram:

Usually, the detection loop should be the rectangle. The two long sides are perpendicular to the direction of the movement of the metal object. The gap between them is recommended to be 0.8-1 meter. The length of the long side depends on the width of the road. Generally, both ends are narrow than the separation distance of the road for 0.3-1 meter. In order to make the detector work in the best condition, the inductance of the loop coil should be kept between 100uH-300uH, In the case of loop coil inductance unchanged. The cylinder numbers have an important relationship with the perimeter, the perimeter is smaller, cylinder more and more.:

loop detector troubleshooting:

If normal operation is not possible, please check:
A. Press the RESET button to RESET the detection host.
B. Observe the red LED light of POWER: if it is not on, check the external POWER supply and internal fuse.
C. If the LOOP/FAULT green LED flashes, it may be: the LOOP of the LOOP is short and the number of loops is insufficient (the flashing is slow); Open circuit, too many loops (quick flicker).
D. An insufficient number of wire loops (too high frequency): the frequency selection switch can be changed to LOW. If it is still too high, the number of wire loops must be increased.
E. Too many wire loops (too low frequency): the frequency selection switch can be changed to HI, if it is still too low, the number of wire loops must be reduced.

Also, for more questions about Loop Sensor for Vehicle Access, if you are interested, please contact us.

Loop Sensor For Vehicle  Access.

 

 

 

 

 

 

 

 

 

 

 

 

 

Related Products:

Get in Touch with us

Still have Questions

Our Headquarters

Work Time :
08:00-18:00(Beijing time)
FAX :
+86(755)27651483
Business Phone :
+8613927455427(Working time)
Email :
trafficloopdetector@gmail.com
Factory Address :
Mingjinhai Industry Park, Tangtou Road,Shiyan Town, Bao'an District

Send Us an Email

contact us